FasTC/Base/include/CompressionJob.h

239 lines
8 KiB
C
Raw Normal View History

/* FasTC
* Copyright (c) 2012 University of North Carolina at Chapel Hill. All rights reserved.
*
* Permission to use, copy, modify, and distribute this software and its documentation for educational,
* research, and non-profit purposes, without fee, and without a written agreement is hereby granted,
* provided that the above copyright notice, this paragraph, and the following four paragraphs appear
* in all copies.
*
* Permission to incorporate this software into commercial products may be obtained by contacting the
* authors or the Office of Technology Development at the University of North Carolina at Chapel Hill <otd@unc.edu>.
*
* This software program and documentation are copyrighted by the University of North Carolina at Chapel Hill.
* The software program and documentation are supplied "as is," without any accompanying services from the
* University of North Carolina at Chapel Hill or the authors. The University of North Carolina at Chapel Hill
* and the authors do not warrant that the operation of the program will be uninterrupted or error-free. The
* end-user understands that the program was developed for research purposes and is advised not to rely
* exclusively on the program for any reason.
*
* IN NO EVENT SHALL THE UNIVERSITY OF NORTH CAROLINA AT CHAPEL HILL OR THE AUTHORS BE LIABLE TO ANY PARTY FOR
* DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS, ARISING OUT OF THE
* USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE UNIVERSITY OF NORTH CAROLINA AT CHAPEL HILL OR THE
* AUTHORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* THE UNIVERSITY OF NORTH CAROLINA AT CHAPEL HILL AND THE AUTHORS SPECIFICALLY DISCLAIM ANY WARRANTIES, INCLUDING,
* BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ANY
* STATUTORY WARRANTY OF NON-INFRINGEMENT. THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS, AND THE UNIVERSITY
* OF NORTH CAROLINA AT CHAPEL HILL AND THE AUTHORS HAVE NO OBLIGATIONS TO PROVIDE MAINTENANCE, SUPPORT, UPDATES,
* ENHANCEMENTS, OR MODIFICATIONS.
*
* Please send all BUG REPORTS to <pavel@cs.unc.edu>.
*
* The authors may be contacted via:
*
* Pavel Krajcevski
* Dept of Computer Science
* 201 S Columbia St
* Frederick P. Brooks, Jr. Computer Science Bldg
* Chapel Hill, NC 27599-3175
* USA
*
* <http://gamma.cs.unc.edu/FasTC/>
*/
#ifndef __COMPRESSION_JOBS_H__
#define __COMPRESSION_JOBS_H__
#include "TexCompTypes.h"
#include "CompressionFormat.h"
#ifdef _MSC_VER
# define ALIGN(x) __declspec( align(x) )
#else
# define ALIGN(x) __attribute__((aligned(x)))
#endif
#define ALIGN_SSE ALIGN(16)
namespace FasTC {
// This structure defines a compression job. Here, width and height are the dimensions
// of the image in pixels. inBuf contains the R8G8B8A8 data that is to be compressed, and
// outBuf will contain the compressed BC7 data.
//
// Implicit sizes:
// inBuf - (width * height * 4) bytes
// outBuf - (width * height) bytes
class CompressionJob {
private:
ECompressionFormat m_Format;
const uint8 *m_InBuf;
uint8 *m_OutBuf;
uint32 m_Width;
uint32 m_Height;
uint32 m_XStart, m_XEnd;
uint32 m_YStart, m_YEnd;
public:
ECompressionFormat Format() const { return m_Format; }
const uint8 *InBuf() const { return m_InBuf; }
uint8 *OutBuf() const { return m_OutBuf; }
uint32 Width() const { return m_Width; }
uint32 Height() const { return m_Height; }
uint32 XStart() const { return m_XStart; }
uint32 XEnd() const { return m_XEnd; }
uint32 YStart() const { return m_YStart; }
uint32 YEnd() const { return m_YEnd; }
CompressionJob(
ECompressionFormat _fmt,
const uint8 *_inBuf,
unsigned char *_outBuf,
const uint32 _width,
const uint32 _height)
: m_Format(_fmt)
, m_InBuf(_inBuf)
, m_OutBuf(_outBuf)
, m_Width(_width)
, m_Height(_height)
, m_XStart(0), m_XEnd(_width)
, m_YStart(0), m_YEnd(_height)
{ }
CompressionJob(
ECompressionFormat _fmt,
const uint8 *_inBuf,
unsigned char *_outBuf,
const uint32 _width,
const uint32 _height,
const uint32 _xOffset,
const uint32 _yOffset)
: m_Format(_fmt)
, m_InBuf(_inBuf)
, m_OutBuf(_outBuf)
, m_Width(_width)
, m_Height(_height)
, m_XStart(_xOffset), m_XEnd(_width)
, m_YStart(_yOffset), m_YEnd(_height)
{ }
CompressionJob(
ECompressionFormat _fmt,
const uint8 *_inBuf,
unsigned char *_outBuf,
const uint32 _width,
const uint32 _height,
const uint32 _xOffset,
const uint32 _yOffset,
const uint32 _xEndpoint,
const uint32 _yEndpoint)
: m_Format(_fmt)
, m_InBuf(_inBuf)
, m_OutBuf(_outBuf)
, m_Width(_width)
, m_Height(_height)
, m_XStart(_xOffset), m_XEnd(_xEndpoint)
, m_YStart(_yOffset), m_YEnd(_yEndpoint)
{ }
// Returns the x and y coordinates of the pixels that corresponds to the block
// index for the given format.
void BlockIdxToCoords(uint32 blockIdx, uint32 (&out)[2]) const {
uint32 blockDim[2];
GetBlockDimensions(Format(), blockDim);
const uint32 kNumBlocksX = Width() / blockDim[0];
const uint32 blockX = blockIdx % kNumBlocksX;
const uint32 blockY = blockIdx / kNumBlocksX;
out[0] = blockX * blockDim[0];
out[1] = blockY * blockDim[1];
}
// Returns the x and y coordinates of the pixels that corresponds to the block
// index for the given format.
uint32 CoordsToBlockIdx(uint32 x, uint32 y) const {
uint32 blockDim[2];
GetBlockDimensions(Format(), blockDim);
const uint32 kNumBlocksX = Width() / blockDim[0];
const uint32 blockX = x / blockDim[0];
const uint32 blockY = y / blockDim[1];
return blockY * kNumBlocksX + blockX;
}
};
// This struct mirrors that for a compression job, but is used to decompress a BC7 stream. Here, inBuf
// is a buffer of BC7 data, and outBuf is the destination where we will copy the decompressed R8G8B8A8 data
class DecompressionJob {
private:
const ECompressionFormat m_Format;
const uint8 *m_InBuf;
uint8 *m_OutBuf;
const uint32 m_Width;
const uint32 m_Height;
public:
const uint8 *InBuf() const { return m_InBuf; }
uint8 *OutBuf() const { return m_OutBuf; }
uint32 Width() const { return m_Width; }
uint32 Height() const { return m_Height; }
uint32 Format() const { return m_Format; }
DecompressionJob(
ECompressionFormat _fmt,
const uint8 *_inBuf, uint8 *_outBuf,
uint32 _width, uint32 _height)
: m_Format(_fmt)
, m_InBuf(_inBuf)
, m_OutBuf(_outBuf)
, m_Width(_width)
, m_Height(_height)
{ }
};
// A structure for maintaining a list of textures to compress.
class CompressionJobList {
public:
// Initialize the list by specifying the total number of jobs that it will contain.
// This constructor allocates the necessary memory to hold the array.
CompressionJobList(const uint32 nJobs);
~CompressionJobList();
// Overrides to deal with memory management.
CompressionJobList(const CompressionJobList &);
CompressionJobList &operator =(const CompressionJobList &);
// Add a job to the list. This function returns false on failure.
bool AddJob(const CompressionJob &);
// Get the maximum number of jobs that this list can hold.
uint32 GetTotalNumJobs() const { return m_TotalNumJobs; }
// Get the current number of jobs in the list.
uint32 GetNumJobs() const { return m_NumJobs; }
// Returns the specified job.
const CompressionJob *GetJob(uint32 idx) const;
uint32 *GetFinishedFlag(uint32 idx) const;
private:
CompressionJob *m_Jobs;
uint32 m_NumJobs;
const uint32 m_TotalNumJobs;
struct FinishedFlag{
ALIGN(32) uint32 m_flag;
} *m_FinishedFlags;
public:
ALIGN(32) uint32 m_CurrentJobIndex;
ALIGN(32) uint32 m_CurrentBlockIndex;
};
} // namespace FasTC
#endif // __COMPRESSION_JOBS_H__