unicorn/qemu/qapi/qobject-output-visitor.c

257 lines
7.6 KiB
C
Raw Normal View History

2015-08-21 07:04:50 +00:00
/*
* Core Definitions for QAPI/QMP Command Registry
*
* Copyright IBM, Corp. 2011
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU LGPL, version 2.1 or later.
* See the COPYING.LIB file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qapi/qobject-output-visitor.h"
2015-08-21 07:04:50 +00:00
#include "qapi/visitor-impl.h"
#include "qemu/queue.h"
#include "qemu-common.h"
#include "qapi/qmp/types.h"
#include "qapi/qmp/qerror.h"
typedef struct QStackEntry
{
QObject *value;
void *qapi; /* sanity check that caller uses same pointer */
QSLIST_ENTRY(QStackEntry) node;
2015-08-21 07:04:50 +00:00
} QStackEntry;
struct QObjectOutputVisitor
2015-08-21 07:04:50 +00:00
{
Visitor visitor;
QSLIST_HEAD(, QStackEntry) stack; /* Stack of unfinished containers */
QObject *root; /* Root of the output visit */
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Backports commit 3b098d56979d2f7fd707c5be85555d114353a28d from qemu
2018-02-25 06:20:00 +00:00
QObject **result; /* User's storage location for result */
2015-08-21 07:04:50 +00:00
};
#define qobject_output_add(qov, name, value) \
qobject_output_add_obj(qov, name, QOBJECT(value))
#define qobject_output_push(qov, value, qapi) \
qobject_output_push_obj(qov, QOBJECT(value), qapi)
2015-08-21 07:04:50 +00:00
static QObjectOutputVisitor *to_qov(Visitor *v)
2015-08-21 07:04:50 +00:00
{
return container_of(v, QObjectOutputVisitor, visitor);
2015-08-21 07:04:50 +00:00
}
/* Push @value onto the stack of current QObjects being built */
static void qobject_output_push_obj(QObjectOutputVisitor *qov, QObject *value,
void *qapi)
2015-08-21 07:04:50 +00:00
{
QStackEntry *e = g_malloc0(sizeof(*e));
assert(qov->root);
assert(value);
2015-08-21 07:04:50 +00:00
e->value = value;
e->qapi = qapi;
QSLIST_INSERT_HEAD(&qov->stack, e, node);
2015-08-21 07:04:50 +00:00
}
/* Pop a value off the stack of QObjects being built, and return it. */
static QObject *qobject_output_pop(QObjectOutputVisitor *qov, void *qapi)
2015-08-21 07:04:50 +00:00
{
QStackEntry *e = QSLIST_FIRST(&qov->stack);
2015-08-21 07:04:50 +00:00
QObject *value;
assert(e);
assert(e->qapi == qapi);
QSLIST_REMOVE_HEAD(&qov->stack, node);
2015-08-21 07:04:50 +00:00
value = e->value;
assert(value);
g_free(e);
2015-08-21 07:04:50 +00:00
return value;
}
/* Add @value to the current QObject being built.
* If the stack is visiting a dictionary or list, @value is now owned
* by that container. Otherwise, @value is now the root. */
static void qobject_output_add_obj(QObjectOutputVisitor *qov, const char *name,
QObject *value)
2015-08-21 07:04:50 +00:00
{
QStackEntry *e = QSLIST_FIRST(&qov->stack);
QObject *cur = e ? e->value : NULL;
2015-08-21 07:04:50 +00:00
if (!cur) {
/* Don't allow reuse of visitor on more than one root */
assert(!qov->root);
qov->root = value;
} else {
switch (qobject_type(cur)) {
case QTYPE_QDICT:
assert(name);
qdict_put_obj(qobject_to_qdict(cur), name, value);
break;
case QTYPE_QLIST:
assert(!name);
qlist_append_obj(qobject_to_qlist(cur), value);
break;
default:
g_assert_not_reached();
}
2015-08-21 07:04:50 +00:00
}
}
static void qobject_output_start_struct(Visitor *v, const char *name, void **obj,
size_t unused, Error **errp)
2015-08-21 07:04:50 +00:00
{
QObjectOutputVisitor *qov = to_qov(v);
2015-08-21 07:04:50 +00:00
QDict *dict = qdict_new();
qobject_output_add(qov, name, dict);
qobject_output_push(qov, dict, obj);
2015-08-21 07:04:50 +00:00
}
static void qobject_output_end_struct(Visitor *v, void **obj)
2015-08-21 07:04:50 +00:00
{
QObjectOutputVisitor *qov = to_qov(v);
QObject *value = qobject_output_pop(qov, obj);
assert(qobject_type(value) == QTYPE_QDICT);
2015-08-21 07:04:50 +00:00
}
static void qobject_output_start_list(Visitor *v, const char *name,
GenericList **listp, size_t size,
Error **errp)
2015-08-21 07:04:50 +00:00
{
QObjectOutputVisitor *qov = to_qov(v);
2015-08-21 07:04:50 +00:00
QList *list = qlist_new();
qobject_output_add(qov, name, list);
qobject_output_push(qov, list, listp);
2015-08-21 07:04:50 +00:00
}
static GenericList *qobject_output_next_list(Visitor *v, GenericList *tail,
size_t size)
2015-08-21 07:04:50 +00:00
{
qapi: Simplify semantics of visit_next_list() The semantics of the list visit are somewhat baroque, with the following pseudocode when FooList is used: start() for (prev = head; cur = next(prev); prev = &cur) { visit(&cur->value) } Note that these semantics (advance before visit) requires that the first call to next() return the list head, while all other calls return the next element of the list; that is, every visitor implementation is required to track extra state to decide whether to return the input as-is, or to advance. It also requires an argument of 'GenericList **' to next(), solely because the first iteration might need to modify the caller's GenericList head, so that all other calls have to do a layer of dereferencing. Thankfully, we only have two uses of list visits in the entire code base: one in spapr_drc (which completely avoids visit_next_list(), feeding in integers from a different source than uint8List), and one in qapi-visit.py. That is, all other list visitors are generated in qapi-visit.c, and share the same paradigm based on a qapi FooList type, so we can refactor how lists are laid out with minimal churn among clients. We can greatly simplify things by hoisting the special case into the start() routine, and flipping the order in the loop to visit before advance: start(head) for (tail = *head; tail; tail = next(tail)) { visit(&tail->value) } With the simpler semantics, visitors have less state to track, the argument to next() is reduced to 'GenericList *', and it also becomes obvious whether an input visitor is allocating a FooList during visit_start_list() (rather than the old way of not knowing if an allocation happened until the first visit_next_list()). As a minor drawback, we now allocate in two functions instead of one, and have to pass the size to both functions (unless we were to tweak the input visitors to cache the size to start_list for reuse during next_list, but that defeats the goal of less visitor state). The signature of visit_start_list() is chosen to match visit_start_struct(), with the new parameters after 'name'. The spapr_drc case is a virtual visit, done by passing NULL for list, similarly to how NULL is passed to visit_start_struct() when a qapi type is not used in those visits. It was easy to provide these semantics for qmp-output and dealloc visitors, and a bit harder for qmp-input (several prerequisite patches refactored things to make this patch straightforward). But it turned out that the string and opts visitors munge enough other state during visit_next_list() to make it easier to just document and require a GenericList visit for now; an assertion will remind us to adjust things if we need the semantics in the future. Several pre-requisite cleanup patches made the reshuffling of the various visitors easier; particularly the qmp input visitor. Backports commit d9f62dde1303286b24ac8ce88be27e2b9b9c5f46 from qemu
2018-02-24 00:44:26 +00:00
return tail->next;
2015-08-21 07:04:50 +00:00
}
static void qobject_output_end_list(Visitor *v, void **obj)
2015-08-21 07:04:50 +00:00
{
QObjectOutputVisitor *qov = to_qov(v);
QObject *value = qobject_output_pop(qov, obj);
assert(qobject_type(value) == QTYPE_QLIST);
2015-08-21 07:04:50 +00:00
}
static void qobject_output_type_int64(Visitor *v, const char *name, int64_t *obj,
Error **errp)
2015-08-21 07:04:50 +00:00
{
QObjectOutputVisitor *qov = to_qov(v);
qobject_output_add(qov, name, qint_from_int(*obj));
2015-08-21 07:04:50 +00:00
}
static void qobject_output_type_uint64(Visitor *v, const char *name, uint64_t *obj,
Error **errp)
{
/* FIXME: QMP outputs values larger than INT64_MAX as negative */
QObjectOutputVisitor *qov = to_qov(v);
qobject_output_add(qov, name, qint_from_int(*obj));
}
static void qobject_output_type_bool(Visitor *v, const char *name, bool *obj,
Error **errp)
2015-08-21 07:04:50 +00:00
{
QObjectOutputVisitor *qov = to_qov(v);
qobject_output_add(qov, name, qbool_from_bool(*obj));
2015-08-21 07:04:50 +00:00
}
static void qobject_output_type_str(Visitor *v, const char *name, char **obj,
Error **errp)
2015-08-21 07:04:50 +00:00
{
QObjectOutputVisitor *qov = to_qov(v);
2015-08-21 07:04:50 +00:00
if (*obj) {
qobject_output_add(qov, name, qstring_from_str(*obj));
2015-08-21 07:04:50 +00:00
} else {
qobject_output_add(qov, name, qstring_from_str(""));
2015-08-21 07:04:50 +00:00
}
}
static void qobject_output_type_number(Visitor *v, const char *name, double *obj,
Error **errp)
2015-08-21 07:04:50 +00:00
{
QObjectOutputVisitor *qov = to_qov(v);
qobject_output_add(qov, name, qfloat_from_double(*obj));
2015-08-21 07:04:50 +00:00
}
static void qobject_output_type_any(Visitor *v, const char *name, QObject **obj,
Error **errp)
{
QObjectOutputVisitor *qov = to_qov(v);
qobject_incref(*obj);
qobject_output_add_obj(qov, name, *obj);
}
static void qobject_output_type_null(Visitor *v, const char *name, Error **errp)
{
QObjectOutputVisitor *qov = to_qov(v);
qobject_output_add_obj(qov, name, qnull());
}
/* Finish building, and return the root object.
* The root object is never null. The caller becomes the object's
* owner, and should use qobject_decref() when done with it. */
static void qobject_output_complete(Visitor *v, void *opaque)
2015-08-21 07:04:50 +00:00
{
QObjectOutputVisitor *qov = to_qov(v);
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Backports commit 3b098d56979d2f7fd707c5be85555d114353a28d from qemu
2018-02-25 06:20:00 +00:00
/* A visit must have occurred, with each start paired with end. */
assert(qov->root && QSLIST_EMPTY(&qov->stack));
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Backports commit 3b098d56979d2f7fd707c5be85555d114353a28d from qemu
2018-02-25 06:20:00 +00:00
assert(opaque == qov->result);
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Backports commit 3b098d56979d2f7fd707c5be85555d114353a28d from qemu
2018-02-25 06:20:00 +00:00
*qov->result = qov->root;
qov->result = NULL;
2015-08-21 07:04:50 +00:00
}
static void qobject_output_free(Visitor *v)
{
QObjectOutputVisitor *qov = to_qov(v);
QStackEntry *e;
2015-08-21 07:04:50 +00:00
while (!QSLIST_EMPTY(&qov->stack)) {
e = QSLIST_FIRST(&qov->stack);
QSLIST_REMOVE_HEAD(&qov->stack, node);
g_free(e);
2015-08-21 07:04:50 +00:00
}
qobject_decref(qov->root);
g_free(qov);
2015-08-21 07:04:50 +00:00
}
Visitor *qobject_output_visitor_new(QObject **result)
2015-08-21 07:04:50 +00:00
{
QObjectOutputVisitor *v;
2015-08-21 07:04:50 +00:00
v = g_malloc0(sizeof(*v));
v->visitor.type = VISITOR_OUTPUT;
v->visitor.start_struct = qobject_output_start_struct;
v->visitor.end_struct = qobject_output_end_struct;
v->visitor.start_list = qobject_output_start_list;
v->visitor.next_list = qobject_output_next_list;
v->visitor.end_list = qobject_output_end_list;
v->visitor.type_int64 = qobject_output_type_int64;
v->visitor.type_uint64 = qobject_output_type_uint64;
v->visitor.type_bool = qobject_output_type_bool;
v->visitor.type_str = qobject_output_type_str;
v->visitor.type_number = qobject_output_type_number;
v->visitor.type_any = qobject_output_type_any;
v->visitor.type_null = qobject_output_type_null;
v->visitor.complete = qobject_output_complete;
v->visitor.free = qobject_output_free;
2015-08-21 07:04:50 +00:00
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Backports commit 3b098d56979d2f7fd707c5be85555d114353a28d from qemu
2018-02-25 06:20:00 +00:00
*result = NULL;
v->result = result;
2015-08-21 07:04:50 +00:00
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Backports commit 3b098d56979d2f7fd707c5be85555d114353a28d from qemu
2018-02-25 06:20:00 +00:00
return &v->visitor;
2015-08-21 07:04:50 +00:00
}