mirror of
https://github.com/yuzu-emu/mbedtls
synced 2024-11-25 00:08:07 +00:00
69 lines
2.7 KiB
Markdown
69 lines
2.7 KiB
Markdown
# Hashing tutorial
|
|
|
|
This application performs hashing of a buffer with SHA-256 using various APIs. It serves as a tutorial for the basic hashing APIs of mbed TLS.
|
|
|
|
## Pre-requisites
|
|
|
|
To build and run this example the requirements below are necessary:
|
|
|
|
* A computer with the following software installed:
|
|
* [CMake](http://www.cmake.org/download/).
|
|
* [yotta](https://github.com/ARMmbed/yotta). Please note that **yotta has its own set of dependencies**, listed in the [installation instructions](http://armmbed.github.io/yotta/#installing-on-windows).
|
|
* [Python](https://www.python.org/downloads/).
|
|
* [ARM GCC toolchain](https://launchpad.net/gcc-arm-embedded).
|
|
* A serial terminal emulator (e.g. screen, pySerial, cu).
|
|
* An [FRDM-K64F](http://developer.mbed.org/platforms/FRDM-K64F/) development board, or another board supported by mbed OS (in that case you'll have to substitute frdm-k64f-gcc with the appropriate target below).
|
|
* A micro-USB cable.
|
|
* If your OS is Windows, please follow the installation instructions [for the serial port driver](https://developer.mbed.org/handbook/Windows-serial-configuration).
|
|
|
|
## Getting started
|
|
|
|
1. Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the micro-usb port labeled "OpenSDA".
|
|
|
|
2. Navigate to the mbedtls directory supplied with your release and open a terminal.
|
|
|
|
3. Set the yotta target:
|
|
|
|
```
|
|
yotta target frdm-k64f-gcc
|
|
```
|
|
|
|
4. Check that there are no missing dependencies:
|
|
|
|
```
|
|
$ yt ls
|
|
```
|
|
|
|
If there are, yotta will list them in the terminal. Please install them before proceeding.
|
|
|
|
5. Build mbedtls and the examples. This will take a long time if it is the first time:
|
|
|
|
```
|
|
$ yt build
|
|
```
|
|
|
|
6. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-hashing.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
|
|
|
|
7. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
|
|
|
|
8. Press the reset button on the board.
|
|
|
|
9. The output in the terminal window should look like:
|
|
|
|
```
|
|
{{timeout;10}}
|
|
{{host_test_name;default}}
|
|
{{description;mbed TLS example on hashing}}
|
|
{{test_id;MBEDTLS_EX_HASHING}}
|
|
{{start}}
|
|
|
|
|
|
Method 1: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3
|
|
Method 2: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3
|
|
Method 3: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3
|
|
Method 4: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3
|
|
|
|
DONE
|
|
{{success}}
|
|
{{end}}
|
|
```
|