Isolate the target-specific choice to 3 functions instead of 6.
The code in floatx80_default_nan tried to be over-general. There are
only two targets that support this format: x86 and m68k. Thus there
is no point in inventing a mechanism for snan_bit_is_one.
Move routines that no longer have ifdefs out of softfloat-specialize.h.
Backports commit 377ed92679a2a5f838bc0a095112ea5020720fff from qemu
Reduce the number of ifdefs. Correct the result for OpenRISC
and TriCore (although TriCore fixed in target-specific code).
Backports commit 8fb3d90203f328d1bebcf7f20934027bfc4e7f3f from qemu
Isolate the target-specific choice to 2 functions instead of 6.
The code in float16_default_nan was only correct for ARM, MIPS, and X86.
Though float16 support is rare among our targets.
The code in float128_default_nan was arguably wrong for Sparc. While
QEMU supports the Sparc 128-bit insns, no real cpu enables it.
The code in floatx80_default_nan tried to be over-general. There are
only two targets that support this format: x86 and m68k. Thus there
is no point in inventing a value for snan_bit_is_one.
Move routines that no longer have ifdefs out of softfloat-specialize.h.
Backports commit 0218a16e540ad416683e19dfbd52f75092507b27 from qemu
For each operand, pass a single enumeration instead of a pair of booleans.
The commit also merges multiple different ifdef-selected implementations
of pickNaNMulAdd into a single function whose body is ifdef-selected.
Backports commit 3bd2dec1a1e8fadb49e3ff2e2633f79e01a25c41 from qemu
For each operand, pass a single enumeration instead of a pair of booleans.
The commit also merges multiple different ifdef-selected implementations
of pickNaN into a single function whose body is ifdef-selected.
Backports commit 4f251cfd52c7945ebd6ab0d86518b1a9aa51b10c from qemu
Only MIPS requires snan_bit_is_one to be variable. While we are
specializing softfloat behaviour, allow other targets to eliminate
this runtime check.
Backports commit 03385dfdaaa2dc31bbd07d13244a6b037bfab4cc from qemu
This allows us to delete a lot of additional boilerplate
code which is no longer needed.
Backports commit 6fed16b265a4fcc810895bbca4d67e1ae7a89f07 from qemu
With a canonical representation of NaNs, we can silence an SNaN
immediately rather than delay until the final format is known.
Backports commit 0bcfbcbea548656ff930394f296589728c2a0c5d from qemu
With a canonical representation of NaNs, we can return the
default nan directly rather than delay the expansion until
the final format is known.
Note one case where we uselessly assigned to a.sign, which was
overwritten/ignored later when expanding float_class_dnan.
Backports commit f7e598e264b94d0982e647ac303108781d5eb4fa from qemu
Move the ifdef inside the relevant functions instead of
duplicating the function declarations.
Backports commit bca52234d1c04e0665f67708bcdef6d805d60adb from qemu
Since f3218a8 ("softfloat: add floatx80 constants")
floatx80_infinity is defined but never used.
This patch updates floatx80 functions to use
this definition.
This allows to define a different default Infinity
value on m68k: the m68k FPU defines infinity with
all bits set to zero in the mantissa.
Backports commit 0f605c889ca3fe9744166ad4149d0dff6dacb696 from qemu
Move fpu/softfloat-macros.h to include/fpu/
Export floatx80 functions to be used by target floatx80
specific implementations.
Exports:
propagateFloatx80NaN(), extractFloatx80Frac(),
extractFloatx80Exp(), extractFloatx80Sign(),
normalizeFloatx80Subnormal(), packFloatx80(),
roundAndPackFloatx80(), normalizeRoundAndPackFloatx80()
Also exports packFloat32() that will be used to implement
m68k fsinh, fcos, fsin, ftan operations.
Backports commit 88857aca93f6ec8f372fb9c8201394b0e5582034 from qemu
We can now add float16_muladd and use the common decompose and
canonicalize functions to have a single implementation for
float16/32/64 muladd functions.
Backports commit d446830a3aac33e7221e361dad3ab1e1892646cb from qemu
Currently float128_default_nan() returns 0xFFFF800000000000 in the
higher double word, but it should return 0x7FFF800000000000 which
is the correct higher double word for default qNAN on PowerPC.
Backports commit 5d51eaea84899d88cb161fab3f089168e3812e9e from qemu
Like the original MIPS, HPPA has the MSB of an SNaN set.
However, it has different rules for silencing an SNaN:
(1) msb is cleared and (2) msb-1 must be set if the fraction
is now zero, and (implementation defined) may be set always.
I haven't checked real hardware but chose the set always
alternative because it's easy and within spec.
Backports commit 005fa38d86257d471ac461c066a5409a9f5ebb02 from qemu
Only for Mips platform, and only for cases when snan_bit_is_one is 0,
correct the order of argument comparisons in pickNaNMulAdd().
For more info, see [1], page 53, section "3.5.3 NaN Propagation".
[1] "MIPS Architecture for Programmers Volume IV-j:
The MIPS32 SIMD Architecture Module",
Imagination Technologies LTD, Revision 1.12, February 3, 2016
Backports commit c27644f0e9659471e1c9355da5b667960d311937 from qemu
Only for Mips platform, and only for cases when snan_bit_is_one is 0,
correct default NaN values (in their 16-, 32-, and 64-bit flavors).
For more info, see [1], page 84, Table 6.3 "Value Supplied When a New
Quiet NaN Is Created", and [2], page 52, Table 3.7 "Default NaN
Encodings".
[1] "MIPS Architecture For Programmers Volume II-A:
The MIPS64 Instruction Set Reference Manual",
Imagination Technologies LTD, Revision 6.04, November 13, 2015
[2] "MIPS Architecture for Programmers Volume IV-j:
The MIPS32 SIMD Architecture Module",
Imagination Technologies LTD, Revision 1.12, February 3, 2016
Backports commit a7c04d545a97126c9df9d96623747d8613aaf7db from qemu
fpu/softfloat-specialize.h is the most critical file in SoftFloat
library, since it handles numerous differences between platforms in
relation to floating point arithmetics. This patch makes the code
in this file more consistent format-wise, and hopefully easier to
debug and maintain.
Backports commit a59eaea64686c8966b7653303660f8c26f285c77 from qemu
This patch modifies SoftFloat library so that it can be configured in
run-time in relation to the meaning of signaling NaN bit, while, at the
same time, strictly preserving its behavior on all existing platforms.
Background:
In floating-point calculations, there is a need for denoting undefined or
unrepresentable values. This is achieved by defining certain floating-point
numerical values to be NaNs (which stands for "not a number"). For additional
reasons, virtually all modern floating-point unit implementations use two
kinds of NaNs: quiet and signaling. The binary representations of these two
kinds of NaNs, as a rule, differ only in one bit (that bit is, traditionally,
the first bit of mantissa).
Up to 2008, standards for floating-point did not specify all details about
binary representation of NaNs. More specifically, the meaning of the bit
that is used for distinguishing between signaling and quiet NaNs was not
strictly prescribed. (IEEE 754-2008 was the first floating-point standard
that defined that meaning clearly, see [1], p. 35) As a result, different
platforms took different approaches, and that presented considerable
challenge for multi-platform emulators like QEMU.
Mips platform represents the most complex case among QEMU-supported
platforms regarding signaling NaN bit. Up to the Release 6 of Mips
architecture, "1" in signaling NaN bit denoted signaling NaN, which is
opposite to IEEE 754-2008 standard. From Release 6 on, Mips architecture
adopted IEEE standard prescription, and "0" denotes signaling NaN. On top of
that, Mips architecture for SIMD (also known as MSA, or vector instructions)
also specifies signaling bit in accordance to IEEE standard. MSA unit can be
implemented with both pre-Release 6 and Release 6 main processor units.
QEMU uses SoftFloat library to implement various floating-point-related
instructions on all platforms. The current QEMU implementation allows for
defining meaning of signaling NaN bit during build time, and is implemented
via preprocessor macro called SNAN_BIT_IS_ONE.
On the other hand, the change in this patch enables SoftFloat library to be
configured in run-time. This configuration is meant to occur during CPU
initialization, at the moment when it is definitely known what desired
behavior for particular CPU (or any additional FPUs) is.
The change is implemented so that it is consistent with existing
implementation of similar cases. This means that structure float_status is
used for passing the information about desired signaling NaN bit on each
invocation of SoftFloat functions. The additional field in float_status is
called snan_bit_is_one, which supersedes macro SNAN_BIT_IS_ONE.
IMPORTANT:
This change is not meant to create any change in emulator behavior or
functionality on any platform. It just provides the means for SoftFloat
library to be used in a more flexible way - in other words, it will just
prepare SoftFloat library for usage related to Mips platform and its
specifics regarding signaling bit meaning, which is done in some of
subsequent patches from this series.
Further break down of changes:
1) Added field snan_bit_is_one to the structure float_status, and
correspondent setter function set_snan_bit_is_one().
2) Constants <float16|float32|float64|floatx80|float128>_default_nan
(used both internally and externally) converted to functions
<float16|float32|float64|floatx80|float128>_default_nan(float_status*).
This is necessary since they are dependent on signaling bit meaning.
At the same time, for the sake of code cleanup and simplicity, constants
<floatx80|float128>_default_nan_<low|high> (used only internally within
SoftFloat library) are removed, as not needed.
3) Added a float_status* argument to SoftFloat library functions
XXX_is_quiet_nan(XXX a_), XXX_is_signaling_nan(XXX a_),
XXX_maybe_silence_nan(XXX a_). This argument must be present in
order to enable correct invocation of new version of functions
XXX_default_nan(). (XXX is <float16|float32|float64|floatx80|float128>
here)
4) Updated code for all platforms to reflect changes in SoftFloat library.
This change is twofolds: it includes modifications of SoftFloat library
functions invocations, and an addition of invocation of function
set_snan_bit_is_one() during CPU initialization, with arguments that
are appropriate for each particular platform. It was established that
all platforms zero their main CPU data structures, so snan_bit_is_one(0)
in appropriate places is not added, as it is not needed.
[1] "IEEE Standard for Floating-Point Arithmetic",
IEEE Computer Society, August 29, 2008.
Backports commit af39bc8c49224771ec0d38f1b693ea78e221d7bc from qemu
Replace the int8 softfloat-specific typedef with int8_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\bint8\b/int8_t/g'
together with manual removal of the typedef definition, and
manual undoing of various mis-hits.
Backports commit 8f506c709adb7d3bed4ebefefe9487c156192a64 from qemu
The code in the softfloat source files is under a mixture of
licenses: the original code and many changes from QEMU contributors
are under the base SoftFloat-2a license; changes from Stefan Weil
and RedHat employees are GPLv2-or-later; changes from Fabrice Bellard
are under the BSD license. Clarify this in the comments at the
top of each affected source file, including a statement about
the assumed licensing for future contributions, so we don't need
to remember to ask patch submitters explicitly to pick a license.
Backports commit 16017c48547960539fcadb1f91d252124f442482 from qemu
Revert the parts of commits b645bb4885 and 5a6932d51d which are still
in the codebase and under a SoftFloat-2b license.
Reimplement support for architectures where the most significant bit
in the mantissa is 1 for a signaling NaN rather than a quiet NaN,
by adding handling for SNAN_BIT_IS_ONE being set to the functions
which test values for NaN-ness.
This includes restoring the bugfixes lost in the reversion where
some of the float*_is_quiet_nan() functions were returning true
for both signaling and quiet NaNs.
[This is a mechanical squashing together of two separate "revert"
and "reimplement" patches.]
Backports commit 332d5849708d11b835e0b36f4e26e8b36bfb3f5a from qemu
This commit applies the changes to master which correspond to
replacing commit 158142c2c2df with a set of changes made by:
* taking the SoftFloat-2a release
* mechanically transforming the block comment style
* reapplying Fabrice's original changes from 158142c2c2df
This commit was created by:
diff -u 158142c2c2df import-sf-2a
patch -p1 --fuzz 10 <../relicense-patch.txt
(where import-sf-2a is the branch resulting from the changes above).
Backports commit a7d1ac78e0f1101df2ff84502029a4b0da6024ae from qemu
