unicorn/qemu/qapi/qmp-output-visitor.c
Eric Blake 0d52542da2
qapi: Simplify semantics of visit_next_list()
The semantics of the list visit are somewhat baroque, with the
following pseudocode when FooList is used:

start()
for (prev = head; cur = next(prev); prev = &cur) {
visit(&cur->value)
}

Note that these semantics (advance before visit) requires that
the first call to next() return the list head, while all other
calls return the next element of the list; that is, every visitor
implementation is required to track extra state to decide whether
to return the input as-is, or to advance. It also requires an
argument of 'GenericList **' to next(), solely because the first
iteration might need to modify the caller's GenericList head, so
that all other calls have to do a layer of dereferencing.

Thankfully, we only have two uses of list visits in the entire
code base: one in spapr_drc (which completely avoids
visit_next_list(), feeding in integers from a different source
than uint8List), and one in qapi-visit.py. That is, all other
list visitors are generated in qapi-visit.c, and share the same
paradigm based on a qapi FooList type, so we can refactor how
lists are laid out with minimal churn among clients.

We can greatly simplify things by hoisting the special case
into the start() routine, and flipping the order in the loop
to visit before advance:

start(head)
for (tail = *head; tail; tail = next(tail)) {
visit(&tail->value)
}

With the simpler semantics, visitors have less state to track,
the argument to next() is reduced to 'GenericList *', and it
also becomes obvious whether an input visitor is allocating a
FooList during visit_start_list() (rather than the old way of
not knowing if an allocation happened until the first
visit_next_list()). As a minor drawback, we now allocate in
two functions instead of one, and have to pass the size to
both functions (unless we were to tweak the input visitors to
cache the size to start_list for reuse during next_list, but
that defeats the goal of less visitor state).

The signature of visit_start_list() is chosen to match
visit_start_struct(), with the new parameters after 'name'.

The spapr_drc case is a virtual visit, done by passing NULL for
list, similarly to how NULL is passed to visit_start_struct()
when a qapi type is not used in those visits. It was easy to
provide these semantics for qmp-output and dealloc visitors,
and a bit harder for qmp-input (several prerequisite patches
refactored things to make this patch straightforward). But it
turned out that the string and opts visitors munge enough other
state during visit_next_list() to make it easier to just
document and require a GenericList visit for now; an assertion
will remind us to adjust things if we need the semantics in the
future.

Several pre-requisite cleanup patches made the reshuffling of
the various visitors easier; particularly the qmp input visitor.

Backports commit d9f62dde1303286b24ac8ce88be27e2b9b9c5f46 from qemu
2018-02-23 19:50:26 -05:00

249 lines
6.8 KiB
C

/*
* Core Definitions for QAPI/QMP Command Registry
*
* Copyright IBM, Corp. 2011
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU LGPL, version 2.1 or later.
* See the COPYING.LIB file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qapi/qmp-output-visitor.h"
#include "qapi/visitor-impl.h"
#include "qemu/queue.h"
#include "qemu-common.h"
#include "qapi/qmp/types.h"
#include "qapi/qmp/qerror.h"
typedef struct QStackEntry
{
QObject *value;
QTAILQ_ENTRY(QStackEntry) node;
} QStackEntry;
typedef QTAILQ_HEAD(QStack, QStackEntry) QStack;
struct QmpOutputVisitor
{
Visitor visitor;
QStack stack; /* Stack of containers that haven't yet been finished */
QObject *root; /* Root of the output visit */
};
#define qmp_output_add(qov, name, value) \
qmp_output_add_obj(qov, name, QOBJECT(value))
#define qmp_output_push(qov, value) qmp_output_push_obj(qov, QOBJECT(value))
static QmpOutputVisitor *to_qov(Visitor *v)
{
return container_of(v, QmpOutputVisitor, visitor);
}
/* Push @value onto the stack of current QObjects being built */
static void qmp_output_push_obj(QmpOutputVisitor *qov, QObject *value)
{
QStackEntry *e = g_malloc0(sizeof(*e));
assert(qov->root);
assert(value);
e->value = value;
QTAILQ_INSERT_HEAD(&qov->stack, e, node);
}
/* Pop a value off the stack of QObjects being built, and return it. */
static QObject *qmp_output_pop(QmpOutputVisitor *qov)
{
QStackEntry *e = QTAILQ_FIRST(&qov->stack);
QObject *value;
assert(e);
QTAILQ_REMOVE(&qov->stack, e, node);
value = e->value;
assert(value);
g_free(e);
return value;
}
/* Add @value to the current QObject being built.
* If the stack is visiting a dictionary or list, @value is now owned
* by that container. Otherwise, @value is now the root. */
static void qmp_output_add_obj(QmpOutputVisitor *qov, const char *name,
QObject *value)
{
QStackEntry *e = QTAILQ_FIRST(&qov->stack);
QObject *cur = e ? e->value : NULL;
if (!cur) {
/* Don't allow reuse of visitor on more than one root */
assert(!qov->root);
qov->root = value;
} else {
switch (qobject_type(cur)) {
case QTYPE_QDICT:
assert(name);
qdict_put_obj(qobject_to_qdict(cur), name, value);
break;
case QTYPE_QLIST:
assert(!name);
qlist_append_obj(qobject_to_qlist(cur), value);
break;
default:
g_assert_not_reached();
}
}
}
static void qmp_output_start_struct(Visitor *v, const char *name, void **obj,
size_t unused, Error **errp)
{
QmpOutputVisitor *qov = to_qov(v);
QDict *dict = qdict_new();
qmp_output_add(qov, name, dict);
qmp_output_push(qov, dict);
}
static void qmp_output_end_struct(Visitor *v)
{
QmpOutputVisitor *qov = to_qov(v);
QObject *value = qmp_output_pop(qov);
assert(qobject_type(value) == QTYPE_QDICT);
}
static void qmp_output_start_list(Visitor *v, const char *name,
GenericList **listp, size_t size,
Error **errp)
{
QmpOutputVisitor *qov = to_qov(v);
QList *list = qlist_new();
qmp_output_add(qov, name, list);
qmp_output_push(qov, list);
}
static GenericList *qmp_output_next_list(Visitor *v, GenericList *tail,
size_t size)
{
return tail->next;
}
static void qmp_output_end_list(Visitor *v)
{
QmpOutputVisitor *qov = to_qov(v);
QObject *value = qmp_output_pop(qov);
assert(qobject_type(value) == QTYPE_QLIST);
}
static void qmp_output_type_int64(Visitor *v, const char *name, int64_t *obj,
Error **errp)
{
QmpOutputVisitor *qov = to_qov(v);
qmp_output_add(qov, name, qint_from_int(*obj));
}
static void qmp_output_type_uint64(Visitor *v, const char *name, uint64_t *obj,
Error **errp)
{
/* FIXME: QMP outputs values larger than INT64_MAX as negative */
QmpOutputVisitor *qov = to_qov(v);
qmp_output_add(qov, name, qint_from_int(*obj));
}
static void qmp_output_type_bool(Visitor *v, const char *name, bool *obj,
Error **errp)
{
QmpOutputVisitor *qov = to_qov(v);
qmp_output_add(qov, name, qbool_from_bool(*obj));
}
static void qmp_output_type_str(Visitor *v, const char *name, char **obj,
Error **errp)
{
QmpOutputVisitor *qov = to_qov(v);
if (*obj) {
qmp_output_add(qov, name, qstring_from_str(*obj));
} else {
qmp_output_add(qov, name, qstring_from_str(""));
}
}
static void qmp_output_type_number(Visitor *v, const char *name, double *obj,
Error **errp)
{
QmpOutputVisitor *qov = to_qov(v);
qmp_output_add(qov, name, qfloat_from_double(*obj));
}
static void qmp_output_type_any(Visitor *v, const char *name, QObject **obj,
Error **errp)
{
QmpOutputVisitor *qov = to_qov(v);
qobject_incref(*obj);
qmp_output_add_obj(qov, name, *obj);
}
static void qmp_output_type_null(Visitor *v, const char *name, Error **errp)
{
QmpOutputVisitor *qov = to_qov(v);
qmp_output_add_obj(qov, name, qnull());
}
/* Finish building, and return the root object.
* The root object is never null. The caller becomes the object's
* owner, and should use qobject_decref() when done with it. */
QObject *qmp_output_get_qobject(QmpOutputVisitor *qov)
{
/* A visit must have occurred, with each start paired with end. */
assert(qov->root && QTAILQ_EMPTY(&qov->stack));
qobject_incref(qov->root);
return qov->root;
}
Visitor *qmp_output_get_visitor(QmpOutputVisitor *v)
{
return &v->visitor;
}
void qmp_output_visitor_cleanup(QmpOutputVisitor *v)
{
QStackEntry *e, *tmp;
QTAILQ_FOREACH_SAFE(e, &v->stack, node, tmp) {
QTAILQ_REMOVE(&v->stack, e, node);
g_free(e);
}
qobject_decref(v->root);
g_free(v);
}
QmpOutputVisitor *qmp_output_visitor_new(void)
{
QmpOutputVisitor *v;
v = g_malloc0(sizeof(*v));
v->visitor.type = VISITOR_OUTPUT;
v->visitor.start_struct = qmp_output_start_struct;
v->visitor.end_struct = qmp_output_end_struct;
v->visitor.start_list = qmp_output_start_list;
v->visitor.next_list = qmp_output_next_list;
v->visitor.end_list = qmp_output_end_list;
v->visitor.type_int64 = qmp_output_type_int64;
v->visitor.type_uint64 = qmp_output_type_uint64;
v->visitor.type_bool = qmp_output_type_bool;
v->visitor.type_str = qmp_output_type_str;
v->visitor.type_number = qmp_output_type_number;
v->visitor.type_any = qmp_output_type_any;
v->visitor.type_null = qmp_output_type_null;
QTAILQ_INIT(&v->stack);
return v;
}